Skip to main content

ATS1204E

8-32 zones DGP input expander, 3 A power supply, large metal housing, EN Grade 3 Class II
  • 8 inputs on board
  • Expandable to 32 inputs
  • 8 Open Collector outputs on board
  • Expandable to 32 OC outputs/relays with optional cards
  • 1 siren output
View all

At a glance

Product overview

The ATS1201E and ATS1204E expanders offer 8 standard inputs, 8 Open Collectors (OC) outputs and a siren driver. The expander can be extended to a total of 32 inputs and 32 outputs. It has a built-in 3 A switched mode power supply.

Expanders

Expanders are used to expand the number of alarm inputs in an Advisor Advanced system. Expanders allow inputs and outputs/relays to be connected at a location remote from an Advisor Advanced panel. Expanders communicate via poll & reply messages. Detectors, door contacts and other detection devices are connected to expanders that report any change of state to the control panel for processing. Available expanders include support for conventional devices, wireless devices as well as intelligent addressable devices. A special expander is available providing expansion of four to eight intelligent doors or lifts.

System databus connection

The system databus is used to connect expanders as well as keypads and readers (RASs) to the Advisor Advanced control panel. Remote devices can be up to 1.5 km from a control panels when using the preferred wiring and cable types. Keypads, readers and expanders have to be connected via a 2 pair twisted and shielded data cable to the system databus connection to achieve this. (WCAT52 is recommended). Daisy chain is the preferred wiring method. The shield of the data cable should be connected to earth at the control panel and should be left disconnected at any other end.

Functionality

Expanders provide information from remote locations to Advisor Advanced control panels in structured records. Data collected ranges from a wired input state to wireless or addressable device dates to a door state.
Bus devices communicate with the control panel. If a failure in communication occurs, the expander remembers the last alarm in a system preventing loss of an alarm due to a short interruption in data communication.
Up to 15 or 30 expanders can be connected to an Advisor Advanced depending on the variant.

Details

  • 8 inputs on board
  • Expandable to 32 inputs
  • 8 Open Collector outputs on board
  • Expandable to 32 OC outputs/relays with optional cards
  • 1 siren output
  • Switched mode power supply

Technical specifications

General
Expander type
Input expander
Product line
Advisor Advanced
ATS Master
Connection type
Databus connection
Compatibility
Advisor Advanced, Advisor Master
Max. distance from panel
1.5 km
Max. per panel
15 / 30 (depending on panel type)
Specified cable
WCAT52 / WCAT54 or equivalent
System
Addressing
DIP Switches
End-of-line resistor
Selectable
Inputs
Total
32
Onboard
8
Expandable
24 (3x ATS1202)
Outputs
Total
32
Onboard
8
Expandable
24
Type of outputs
Open Collector
Relays
Via ATS1810 / ATS1811
Maximum number of outputs
32
Siren outputs
1
Backup
Battery type
Up to 25 Ah
Dynamic battery testing
Yes
Electrical
Power supply type
230 VAC
Power supply value
230 VAC +10 %, -15 %, 50/60 Hz
Power consumption
2.9 A max. at 13.8 VDC
Current consumption
75 mA typical
Integrated power supply
Yes
Physical
Physical dimensions
475 x 460 x 160 mm
Net weight
9.7 kg
Material
Steel (painted)
Housing
Large Metal
Environmental
Operating temperature
-10 to +55°C
Relative humidity
95% noncondensing
Environment
EN50130-5 ; Class II - Indoor (general)
IP rating
IP30
Regulatory
Compliancy
CE
Certification
CE

Downloads

All downloads

Datasheet

Installation sheet

Technical documentation

Other EU certificate

Certificates

If available, the downloads of the Certificates, Software & Firmware and Media are displayed in their default language.