Skip to main content

KE-IU3010

Excellence series intelligent addressable 1 input unit
  • Loop powered, saving external supply and installation cost
  • Provides an addressable, input for 3rd party equipment supervision
  • Fully supervised, bi-level input for pre-alarm and alarm supervision using a single input
  • DIN or wall mounted for installation flexibility
  • Local test features for ease of validation
View all

At a glance

General

The innovative Excellence series of intelligent addressable devices offers advanced features for reliability and peace of mind. Coupled with features for ease of installation and maintenance on new fire detection systems, it’s a perfect match for exceptional overall performance.
The Excellence series input/output devices are designed to provide much needed flexibility to input monitoring and output switching. These modules, combined with the powerful features of a Kidde Excellence series addressable CIE, give customers versatility for diverse applications.
The KE-IU3010 is a Kidde Excellence series addressable single input unit. Powered directly from the Excellence loop, it offers an input with selectable line supervision.

Applications

The KE-IU3010 is designed to monitor any potential free contacts. Any normally open or normally closed contact may be selected to be supervised or unsupervised. Normal, open, passive, active or short circuit states on the input are reported back to the CIE where, depending on the programming, separate actions may be taken for any of these states.
The KE-IU3010 may be located anywhere on the Kidde Excellence loop where it occupies only 1 of 128 available addresses. Housed in a low profile molding, the interface is designed to clip directly onto a standard DIN rail fixing or be installed in a suitable wall mount housing. It is intended for installation inside the equipment to be switched, thereby offering savings in installation costs compared with long, auxiliary circuit wiring runs from the control panel.

Installation & Maintenance Features

The KE-IU3010 is connected to the CIE via a 2-wire communication loop that carries both power and control data. Tri-Colour LED indicators positioned on the front face of the unit provide the engineer with clear identification of the operational state of the unit, as well as the status of any input and/or output control. Additional manual test facilities on the unit allows local testing without the need for control panel intervention, saving time during installation and commissioning.
Excellence series devices use an advanced digital data communications protocol with extensive error correction algorithms to ensure system reliability.

Details

  • Loop powered, saving external supply and installation cost
  • Provides an addressable, input for 3rd party equipment supervision
  • Fully supervised, bi-level input for pre-alarm and alarm supervision using a single input
  • DIN or wall mounted for installation flexibility
  • Local test features for ease of validation
  • Local, clear operation status indication for ease of maintenance

Technical specifications

General
Status indication
Tri-coloured LEDs
Compatibility
Kidde Commercial Excellence Systems
Addressing method
DIP Switches
Address range
1 to 128
Electrical
Power supply type
Loop powered
Operating voltage
17 to 29 VDC
Current consumption
250 μA @ 24 VDC (quiescent)
2.5 mA @ 24 VDC (active)
Communication voltage
4 to 11 V (pulsed)
Input
Input quantity
1
Input type and rating
Bi-level, Supervised
Input states
Active
Fault
Normal
Open
Short
Pre-alarm resistor
3 kΩ to 7 kΩ
Alarm resistor
0.3 kΩ to 3 kΩ
Termination resistor
15 kΩ, ¼ W, 1%
Cable specification 0.5 to 4.9 mm² (10 to 20 AWG)
Cable length <10 m
Physical
Physical dimensions
87 x 80 x 26 mm (W x H x D)
Net weight
60 g
Colour
Signal white (RAL 9003)
Mounting type
DIN-rail
Surface mount
Wall mount
Material
PC / ABS
Cable specification
Loop: 0.13 to 3.31 mm² (12 to 26 AWG) shielded/unshielded twisted-pair < 52 Ω , < 500 nF
Environmental
Vandal proof
No
Operating temperature
-22 to +55°C
Storage temperature
-30 to +65°C
Relative humidity
10 to 93% noncondensing
Environment
Indoor
IP rating
IP30
Regulatory
Compliancy
CE
REACH
RoHS 3
WEEE
Certification
CPR
Standards
EN54-18