Skip to main content

6030-100

Fireray Hub Reflective - Detector
  • Offers laser-assisted, motorised Auto-Alignment™ from the system controller, with manual alignment as an option if needed
  • 2-wire interface from detector to system controller offers an installation with 60% less wiring and in 25% less time using network mode
  • Compensates for natural shifts in alignment from building movement
  • Compensates for gradual build-up of contamination on the optical surfaces
  • Compensates for high levels of sunlight and artificial lighting
View all

At a glance

General

The Fireray Hub Reflective Detector is an additional beam detector head for use the the Fireray Hub Reflective System. Connection of up to 3 Fireray Reflective Detectors can be accommodated on a single cable run to the hub, making the installation extremely easy and flexible.

Benefits

It supports modern, reflective motorised beam technology that facilitates:
• Auto-Alignment™
Using the Hub, direct the laser onto the prism and with the press of a button, it aligns itself.
• Building Movement Tracking™
Keeping the beam aligned even if the building moves, preventing unwanted alarms and faults
• Light Cancellation Technology™
Prevent nuisance alarms by compensating for sunlight and artificial light sources

Details

  • Offers laser-assisted, motorised Auto-Alignment™ from the system controller, with manual alignment as an option if needed
  • 2-wire interface from detector to system controller offers an installation with 60% less wiring and in 25% less time using network mode
  • Compensates for natural shifts in alignment from building movement
  • Compensates for gradual build-up of contamination on the optical surfaces
  • Compensates for high levels of sunlight and artificial lighting
  • Dynamic beam phasing allowing beam detectors to be mounted facing each other with the reflectors in the middle
  • Operate in dusty or wet environments due to the high enclosure integrity of the detector

Technical specifications

General
Compatibility
6020-100 Fireray Hub Reflective
Connectivity
2-wire & screen
Addressing method
DIP Switches
Electrical
Power supply type
Loop powered
Operating voltage
14 to 36 VDC
Cable specification
24 to 14 AWG (0.5 to 1.6 mm) ( 1/100" to 6/100")
No. of cable cores
2, dedicated
Detection
Detection principle
Optical infrared beam
Zone length
< 100 m from the hub
Range
8 to 50 m (to 120 m with FD-LRK)
Optical wave length
850 nm
Adjustment angle
± 4.5°
Misalignment tolerance
± 0.5°
Beam path clearance 0.5 m (1¾ ft) radius from centre line between detector and reflector
Response time < 2 s
Physical
Physical dimensions
Detector: 131 x 134 x 131 mm (H x W x D)
Reflector: 100 x 100 x 9 mm (H x W x D)
Net weight
Detector: 0.57 kg
Reflector: 0.06 kg
Mounting type
Hinged mouting
Surface mount
Environmental
Vandal proof
No
Operating temperature
-10 to +55°C (+14 to +131ºF)
Storage temperature
-40 to +85°C (-40 to +185ºF)
Relative humidity
0 to 93% non condensing or icing
Environment
Indoor
IP rating
IP55
Regulatory
Compliancy
CE
REACH
RoHS 3
UKCA
WEEE
Certification
CPR
Voluntary marks
VdS
Standards
EN54-12