ATS1238
32 zones Gen2 868AM and PIRcam wireless receiver DGP
- Expands the Advisor Advanced and Axon panel with 32 wireless zones, including PIR Cameras
- Supports a maximum of 8 wireless PIR Cameras
- Quick configuration using the Aritech "Learn Mode" technology
- Fits in the Large Poly housing
- Features spatial diversity to minimize wireless signal nulls or dead spots and has a nominal open-air receiving range of 400 m
Related products
At a glance
Product overview
The ATS1238 Advanced Wireless receiver expands the Advisor Advanced and Axon panels input capability by up to 32 zones using wireless PIRCam and 868 MHz Gen2 Wireless Sensors: i.e. PIR, Door contact etc. The ATS1238 is typically installed inside the large poly housing and connected to the MI bus interface of the Advisor Advanced and Axon panel. The ATS7072 is used with the ATS1238 to install up to 100 m away from the panel.
The ATS1238 features spatial diversity to minimize wireless dead spots and has a nominal open-air receiving range of 400 m. If dead spots need to be eliminated, a 868 MHz repeater may be used for the 868 Gen2 devices only.
The ATS1238 is EN50131 grade 2 and INCERT approved.
Functionality
Expanders provide information from remote locations to Advisor Advanced and Axon control panels in structured records. Data collected ranges from a wired input state to wireless or addressable device dates to a door state.
Bus devices communicate with the control panel. If a failure in communication occurs, the expander remembers the last alarm in a system, preventing loss of an alarm due to a short interruption in data communication.
Bus devices communicate with the control panel. If a failure in communication occurs, the expander remembers the last alarm in a system, preventing loss of an alarm due to a short interruption in data communication.
Up to 30 expanders can be connected to an Axon or an Advisor Advanced panel, depending on the variant.
Fob buttons may be programmed for users to arm and disarm or to control relays, for example, to remotely open and close a garage door as well as arm or disarm an office security system.
PIR Cameras can be used to take pictures from any event in the system which can be reported to a monitoring station or end user's phone for means of verification.
Details
- Expands the Advisor Advanced and Axon panel with 32 wireless zones, including PIR Cameras
- Supports a maximum of 8 wireless PIR Cameras
- Quick configuration using the Aritech "Learn Mode" technology
- Fits in the Large Poly housing
- Features spatial diversity to minimize wireless signal nulls or dead spots and has a nominal open-air receiving range of 400 m
- Use the Aritech 868 MHz repeater to improve range
- Powered from MI bus interface of the Advisor Advanced or separate power supply when using ATS7072 to extend the distance
- Up to 16 Fob buttons may be programmed for users to arm and disarm or to control relays
- Remote installation (outside panel housing) requires ATS7072 kit
Technical specifications
| General | ||
|---|---|---|
| Expander type |
Wireless expander
|
|
| Product line |
Advisor Advanced
Axon
|
|
| Connection type |
Databus connection
|
|
| Compatibility |
868 MHz Gen2 sensors, PIRcam, Advisor Advanced FW v022.022.0110 or later, Axon MR1.0 or higher
|
|
| Max. distance from panel |
MI bus interface, max 40 cm flat cable or 100 m using ATS7072
|
|
| Max. per panel |
1
|
|
| Specified cable |
WCAT52 / WCAT54 or equivalent
|
|
| System | ||
|---|---|---|
| Addressing |
DIP Switches
|
|
| Inputs | ||
|---|---|---|
| Total |
32
|
|
| No. of wireless zones |
32 max. (8 wireless PIRcam, 16 wireless keyfobs)
|
|
| Wireless | ||
|---|---|---|
| Operating frequency |
2.4 GHz
868 MHz AM
|
|
| Wireless open-air range |
400 m
|
|
| Electrical | ||
|---|---|---|
| Operating voltage |
9.5 to 14.4 VDC
|
|
| Power supply type |
12 VDC
|
|
| Current consumption |
47 mA typical
52 mA max.
|
|
| Integrated power supply |
No
|
|
| Physical | ||
|---|---|---|
| Physical dimensions |
165 x 115 x 40 mm
|
|
| Net weight |
350 g
|
|
| Environmental | ||
|---|---|---|
| Operating temperature |
-10 to +55°C
|
|
| Relative humidity |
95% noncondensing
|
|
| Environment |
EN50130-5 ; Class II - Indoor (general)
|
|
| Regulatory | ||
|---|---|---|
| Compliancy |
CE
|
|
| Certification |
CE
EN50131 Grade 2
INCERT
|
|
Downloads
All downloadsDatasheet
Installation sheet
Other EU certificate
Certificates
If available, the downloads of the Certificates, Software & Firmware and Media are displayed in their default language.